Powder Coatings Limited have been re-finishing motor cycle parts for over 30 years.
We are situated at the heart of the motorway network only 400 yards from Junction 6 of the M6 (click here for map).
The Process
All motor cycle frames and parts are degreased, then shotblasted to remove all the old paint finish and any rust or other foreign matter.
Immediately after shotblasting all parts are sprayed with a two pack zinc chromate etch primer. This seals the freshly shotblasted surface and provides a further barrier against corrosion.
All components are then rubbed down by hand to de-nib the surface and ensure they are smooth.
The parts are then powder coated by hand, applying a coat of polyester (external quality) powder prior to curing in an oven at 180°C minimum for between 25 and 40 minutes depending upon the thickness of the material being coated. After curing the parts are allowed to cool and then 100% inspected prior to packing / labelling.
Self Preparation Needed Prior to Coating
Remove any surplus grease or oil from the frame or inside the headstock or swinging arm. Any bearing surfaces such as headstock area, swinging arm bushes or wheel bearing need to be masked to prevent the shotblasting process roughening them. This can be achieved with two large discs of metal or washers and a length of allthread.
Mask all external threads with 6 turns of masking tape Blank off internal threads using old bolts. Ensure that the swinging arm, centre stand, side frame and headstock are detached from the frame.
Opening Hours
Monday – Thursday |
7.0 a.m. – 5.45 p.m. |
Friday |
7.0 a.m. – 3.00 p.m. |
Closed all Bank Holidays
Phone: 0121 250 2145
Fax: 0121 250 2154
Parts can be sent by courier and are returned within 10 days.
Our address is:
Powder Coatings Limited
215 Tyburn Road
Erdington
Birmingham
B24 8NB
Price List (as from May 2011)
| SINGLE PIECE FRAME WITH SWINGING ARM COATED IN GLOSS BLACK |
£55.00 |
SINGLE PIECE FRAME WITH NO SWINGING ARM |
£49.50 |
| SINGLE PIECE FRAME WITH SWINGING ARM COATED IN A SOLID COLOUR |
£68.20 |
SINGLE PIECE FRAME WITH NO SWINGING ARM |
£60.50 |
| ANY ADDITIONS TO FRAME, REAR PARTS, SEPARATE RAILS ETC |
£13.20 PER PART |
FRAME, S/ARM OR ANY PARTS COATED IN |
+ 50% |
FRAME S/ARM OR ANY PARTS DOUBLE |
+ 100% |
| S/ARM (BY ITSELF) GLOSS BLACK COLOUR |
|
FORK LEGS |
£ 11.00 | SPRINGS |
£ 11.00 |
S/STAND |
£ 7.70 | C/STAND |
£ 14.85 |
TOP YOKE |
£ 7.70 | BOTTOM YOKE |
£ 9.90 |
TOOL BOX |
£ 14.85 | TOOL BOX LID |
£ 9.90 |
CHAIN GUARD |
£ 14.85 | SIDE PANELS |
£ 9.90 |
HEADLIGHT BRACKET |
£ 8.80 | BRAKE ROD |
£ 9.90 |
REAR LIGHT BRACKET |
£ 11.00 | TORQUE ARM |
£ 11.00 |
| BATTERY BOX - SMALL | £13.20 |
BATTERY BOX - LARGE |
£18.70 |
| REAR CARRIER (ONE PIECE) | £22.00 |
REAR CARRIER (MULTI PART) |
£35.20 |
| WHEELS -SINGLE COLOUR | £36.30 |
WHEELS - SINGLE COLOUR + LAQ |
+ 50% |
WHEELS - DOUBLE COATED |
£71.50 |
| HUB | £18.70 |
| OIL TANK | £26.95 |
| BRAKE PEDAL | £11.00 |
| FOOT PEGS/RESTS (PAIR) | £11.00 |
| MUDGUARDS | £26.95 |
| P/TANKS | £35.20 |
SMALL BRACKETS |
£2.75 |
| SMALL BRACKETS (LESS THAN 4 ” X 4 ”) NO DIMENSION GREATER THAN 4 ” |
£3.30 |
OTHER BRACKETS |
£4.40 |
PAYMENT BY CREDIT/DEBIT CARD or CASH.
CHEQUE PAYMENTS ARE NOT ACCEPTED.
